Back to 09-10 Catalog
A B C D E F G H I J K L M N O P Q R S T W
D
DAH 101 Infection Control & Medical Emergencies (2)
Current regulatory mandates, specific step-by-step procedures related to infection control, management of hazardous materials in the dental office, management of emergency situations and basic concepts of pharmacology are introduced in this course. Prerequisites: Admission into the Dental Assisting/Dental Hygiene Integrated Program and completion of program Prerequisites: Dental Hygiene: ENG 101 and BIO 137; Dental Assisting: BIO 135 or BIO 130 or HEA 110 or BIO 137 and BIO 139.
DAH 111 Preventive Dentistry (2)
Dental plaque and its role in dental diseases. The methods and agents utilized by the dental auxiliary to prevent plaque-induced diseases. The role of the dental auxiliary in a variety of prevention oriented programs. Prerequisites: (Completion of (DAH 101 and DAH 121 and DAH135) and (DAS 120 or DHG 120) with a grade of “C” or better.
DAH 121 Dental Sciences I (3)
Oral histology and embryology, head and neck anatomy, and tooth morphology as applicable to the practice of dental assisting and dental hygiene. Prerequisites: Admission into the Dental Assisting/Dental Hygiene Integrated Program and completion of program prerequisites: Dental Hygiene: ENG 101 and BIO 137; Dental Assisting: BIO 135 or BIO 130 or HEA 110 or BIO 137 and BIO 139.
DAH 131 Oral Pathology (3)
The disciplines of general pathology and oral pathology as related to dental hygiene care. Prerequisites: Completion of (DAS 120 or DHG 120) and (DAH 101 and DAH 121 and DAH 135) with a grade of ‘C’ or better.
DAH 135 Oral Radiology (2)
The theory and clinical practice of oral radiographic methods. History and development of x-radiation; properties and uses of x-radiation; radiation hygiene; exposing, processing and mounting of intraoral and extraoral films; and identification of radiographic anatomic landmarks. Prerequisites: Admission into the Dental Assisting/Dental Hygiene Integrated Program and completion of program prerequisites: Dental Hygiene: ENG 101 and BIO 137; Dental Assisting: BIO 135 or BIO 130 or HEA 110 or BIO 137 and BIO 139.
DAH 224 Materials in Dentistry (2)
The physical and chemical properties of dental materials with emphasis on composition and application. Prerequisites: Admission into the Dental Assisting/Dental Hygiene Integrated Program and completion of program prerequisites: Dental Hygiene: ENG 101 and BIO 137; Dental Assisting: BIO 135 or BIO 130 or HEA 110 or BIO 137 and BIO 139 or completion of DHG 130 and DHG132 and DHG 136 with a grade ‘C’ or better.
DAH 235 Practice Management (1)
Legal, ethical and managerial aspects of the dental practice. Prerequisites: Completion of (DAH 101 and DAH 121 and DAH 135 and DAS 120) or (DHG 220 and DHG 221 and DHG 226) with a grade ‘C’ or better.
DAS 120 Dental Assisting I (5)
The preclinical application of dental assisting skills. Prerequisites: Admission to Dental Assisting/Dental Hygiene Integrated Program and completion of program prerequisites: Dental Hygiene: ENG 101 and BIO 137; Dental Assisting: BIO 135 or BIO 130 or HEA 110 or BIO 137 and BIO 139.
DAS 220 Dental Assisting II (6)
The preclinical/clinical application of dental assisting skills from DAS 120. Prerequisites: Completion of DAS 120 and DAH 101 and DAH 121 and DAH 135 and DAH 224 with a grade “C” or better.
DAS 251 Clinical Externship I (4)
A fundamental clinical experience conducted in participating dental offices. Prerequisites: Completion of DAS 120 and DAH 101 and DAH121 and DAH 135 and DAH 224 with a grade “C” or better.
DAS 261 Clinical Externship II*
This is an advanced clinical experience conducted in participating dental offices. *Integrated DA/DH Program. Prerequisites: Admission into the DA/DH Integrated Program and completion of previous semester course work with a grade “C” or better.
DFT 102 Drafting Fundamentals (4)
Explores drafting and its processes: use and maintain equipment and supplies; determine line weights; measure and read line lengths with drafting scales; measure angles; and draw lines, circles, arcs, and irregular curves. Freehand and mechanical lettering, geometric construction, freehand sketching, and beginning orthographic projection. Characteristics of lines and planes in orthographic projection and the principles applied to show the size and shapes of projects. Dimensioning techniques for orthographic drawings.
DFT 108 Introduction to Surveying (3)
Introduces the elements of surveying including measurements, distance corrections, leveling, angles, area computation, computer calculations, topographic surveying, electronic distance measuring instruments, construction surveying, GPS, and GIS.
DFT 108 Introduction to Surveying (3)
Introduces the elements of surveying including measurements, distance corrections, leveling, angles, area computation, computer calculations, topographic surveying, electronic distance measuring instruments, construction surveying, GPS, and GIS.
DFT 112 Engineering Graphics (4)
Includes exploration of lines and planes as they relate to orthographic projection to show the size and shape of objects. Includes application of principles and graphic elements of sectioning to show interior detail; the techniques involved in creating oblique projections, axonometric projections, and perspective drawings; and the dimensioning techniques and symbol usage common to all drafting disciplines. Prerequisites: DFT 102 with a grade of “C” or better or approval of program coordinator.
DFT 122 Introduction to Computer Aided Drafting (4)
Uses computer graphic workstation in the application of fundamental principles and capabilities of CAD, basic drafting conventions, and operations. An in-depth study of computer aided drafting commands, terminology, command utilization, and skill development. Prerequisites: DFT 102 with a grade of “C” or better or approval of program coordinator.
DFT 130 Descriptive Geometry (4)
Examines the spatial relationships between points, lines, and planes in various orthographic projections with graphical solutions; explores the processes to solve problems using auxiliary view projection methods, revolutions, intersections, and developments. Prerequisites: DFT 112 with a grade of “C” or better or approval of program coordinator.
DFT 152 Intermediate Computer Aided Drafting (4)
Uses CAD software to produce advanced two- and three-dimensional object drawings. Advanced techniques of drafting, layering, and symbols associated with one or more design applications. Calculations of perimeters, areas, and mass associated with the drawings. Prerequisites: DFT 122 with a grade of “C” or better or approval of program coordinator.
DFT 212 Industrial Drafting Processes (4)
Explores weldment design, welding symbols, welding processes, and fabrication techniques, tool and die, and jig and fixture drawings. Design specifications, pattern drawings, casting, forming processes, and mechanical drawing principles in relation to the manufacturing industry. Screw-thread design and related fastening concepts as they relate to manufactured items and construction Pre-requisites: DFT 122 with a grade of “C” or better or approval of program coordinator.
DFT 222 Mechanical Design (4)
Explores the design process involved in the development of mechanical working drawings and the design principles in various manufacturing disciplines; gear drawing and design, and cam and follower drawing and design. Design principles, mechanical adaptation, and their drawing practices. Mechanical assemblies, machine design, power transmission, bearings, and seals in assemblies. Shop processes involved in these mechanical designs. Prerequisites: DFT 122 with a grade of “C” or better or approval of program coordinator.
DFT 240 Advanced Dimensioning and Measurement (4)
Presents an in-depth study of advanced industrial dimensioning principles, tolerances, fits, and A.N.S.I. standards. Exploration of the shape and geometric characteristics of parts through geometric tolerancing. Prerequisites: DFT 112 with a grade of “C” or better or approval of program coordinator.
DFT 250 Advanced Computer Aided Drafting (4)
Introduces fundamental principles of the computer language(s) that represents and interfaces with the main CAD software. Write subroutines and programs to perform CAD functions not available in the main CAD software. Prerequisites: DFT 122 with a grade of “C” or better or approval of program coordinator.
DFT 252 Parametric Modeling (4)
Introduces Parametric Modeling and Design of a CAD workstation in exploring the techniques associated with drafting and design using Parametric modeling software. Introduces creation of parametric models and explores associative function and flexibility of concurrent part design. Prerequisites: DFT 152 with a grade of "C" or better or approval of program coordinator.
DFT 291 Special Problems (2)
This course is designed to allow the student to develop a portfolio of mechanical drawings specific to the occupational opportunities in his/her geographical location. Assignments and curriculum will vary as determined by the program instructor. Prerequisite: Permission of the instructor.
DFT 292 Industrial Applications (4)
Develop a portfolio of mechanical drawings specific to the occupational opportunities in specific geographical locations. Assignments and curriculum will vary as determined by the program instructor. Prerequisite: Approval of program coordinator.
DFT 293 Special Problems (1-4)
Expands the portfolio of mechanical drawings specific to the occupational opportunities in specific geographical locations. Prerequisite: Approval of program coordinator.
DFT 298 Practicum (1-3)
Provides supervised work experiences related to the student’s educational objectives. Students participating in the Practicum do not receive compensation. Prerequisite: Approval of program coordinator.
DFT 299 Cooperative Education (1-3)
Provides supervised on-the-job work experience related to the student’s educational objectives. Students participating in the Co-op Education program receive compensation for their work Prerequisite: Approval of program coordinator.
DH 120 Dental Hygiene I (5)
The basic assessment and clinical skills, related theory, professional role and responsibilities of the dental hygienist as a member of the dental health team are included. Prerequisites: Completion of BIO 137 and BIO 139, both with a grade of C or better and acceptance into the Dental Hygiene Program.
DH 121 Oral Biology I (3)
Oral histology and embryology, regional head and neck anatomy, and dental anatomy applicable to the practice of dental hygiene are included in this course. Prerequisites: Completion of BIO 137 and BIO 139, both with a grade of C or better and acceptance into the Dental Hygiene program.
DH 130 Dental Hygiene II (4)
This course is a continuation of DH 120 which prepares the student to provide treatment that includes preventative and therapeutic procedures to promote and maintain oral health and assist the patient in achieving oral health goals. Prerequisites: Completion of DH 120, DH 121 and BSL 214 (or BIO 226), all with a grade of C or better.
DH 131 Oral Biology II (5)
The disciplines of general pathology, oral pathology, pharmacology, and therapeutics as related to dental hygiene care are covered in this course. Prerequisites: Completion of DH 120, DH 121 and BSL 214 (or BIO 226 all with a grade of C or better.
DH 135 Dental Radiology (3)
The theory and clinical practice of oral radiographic methods are presented in this course. Also included are: history and development of x-radiation; properties and uses of x-radiation; radiation hygiene; exposing, processing and mounting intraoral and extraoral radiographs; identification of radiographic anatomical landmarks; and advancements in computer imaging technology in dental radiology. Prerequisites: Completion of DH 120, DH 121 and BSL 214 (or BIO 226) all with a grade of C or better.
DH 136 Periodontics for the Dental Hygienist I (2)
This course focuses on the clinical, histological and radiographic differences between healthy and unhealthy periodontal tissues. Topics to be discussed also include etiology, risk factor assessment, pathogenesis and classification of periodontal diseases. Prerequisites: Completion of DH 120, DH 121 and BSL 214 (or BIO 226), all with a grade of C or better.
DH 220 Dental Hygiene III (4)
Dental Hygiene III emphasizes the continued treatment of clinical patients. Treatment and management of dental patients with special needs are also addressed with attention to appropriate changes in dental treatment in response to a patient’s medical condition. Prerequisites: Completion of DH130, DH 131, DH 135, DH 136 and NFS 101, all with a grade of C or better.
DH 222 Special Needs Patients (3)
Focus is on oral healthcare that is tailored to the specific needs of persons with a variety of medical, disabling or mental conditions. Innovative approaches to serving special care populations are discussed with special emphasis on pharmacological concerns and on treatment modifications. Prerequisites: Completion of DH 130, DH 131, DH 135, DH 136 and NFS 101, all with a grade of C or better.
DH 224 Dental Materials (2)
The physical and chemical properties of dental materials and their application are introduced. Prerequisites: Completion of DH130, DH 131, DH 135 and DH 136, all with a grade of C or better.
DH 226 Periodontics for the Dental Hygienist II (2)
This course provides for the continuation and expansion of the content of Periodontics for the Dental Hygienist I. The role of the dental hygienist in the recognition of systemic implications as related to periodontal diseases is emphasized. Current advancements in the management of patients with periodontal disease are emphasized. Supportive periodontal therapy will be discussed and current surgical therapies will be introduced. Prerequisites: Completion of DH 130, DH 131, DH 135, DH 136 and NFS 101, all with a grade of C or better.
DH 229 Local Anesthesia (2)
Common oral local anesthesia injection techniques and the related background information are addressed in this course. Subjects include: anatomic considerations, armamentarium, basic injection techniques, record keeping, neurophysiology, related pharmacology, patient evaluation, complications and contraindications. The pharmacology, administration and contraindications of Nitrous Oxide are also included. This elective course satisfies the Kentucky State Dental Practice Act regarding “delegation of block and infiltration anesthesia and nitrous oxide analgesia to dental hygienists.” Prerequisites: Completion of DH 130, DH131, DH 135 and DH 136 all with a grade of C or better.
DH 230 Dental Hygiene IV (4)
This course focuses on the mastery of all dental hygiene clinical skills utilized in treating patients. Prerequisites: Completion of DH 220, DH221, DH224, and DH 226, all with a grade of C or better.
DH 235 Principles of Practice (1)
This course covers the legal, ethical, and managerial aspects of dental hygiene practice. Prerequisites: Completion of DH 220, DH 222, DH 224 and DH 226, all with a grade of C or better.
DH 238 Community Dental Health (4)
Basic concepts in assessing community dental health needs are introduced. Planning, implementing and evaluating dental health programs, as well as current trends and issues in preventive dental health education, are discussed. Concepts related to reading and interpreting scientific literature are also included. Students must develop and present a community dental health project and scientific tabletop presentation. Prerequisites: Completion of DH 220, DH 222, DH 224 and DH 226, all with a grade of C or better.
DH 299 Independent Study in Dental Hygiene (1-4)
A special project or experience, approved by an instructor, provides an objective for independent study for dental hygiene technology students. This course may be repeated to a maximum of six credit hours. Prerequisite: Consent of instructor.
DIT 100 Mechanical Concepts (3)
This course introduces the student to the basic fundamentals of precision measurement and its application to the industrial setting.
DIT 101 Basic Equipment Operation for Mechanics (3)
This course is designed to give diesel technology students, who are seeking the construction equipment mechanic track, the basic operation of various types of heavy equipment. This class gives the student the skills needed to operate heavy equipment to the level that allows them to diagnose mechanical and other operational problems of the equipment. (This course is a prerequisite for the Construction Equipment Technician diploma program at Hazard Technical College and CVTC - Middlesboro Campus.) (This course is also a prerequisite to the Heavy Equipment Operation program at Hazard Technical College.)
DIT 103 Preventive Maintenance Lab (1)
Instruction on preventive maintenance practices, scheduled procedures, documents, and D.O.T. required record system and on determining the needs for repair.
DIT 110 Introduction to Diesel Engines (3)
Fundamental concepts of the operation of two- and four-stroke diesel and gasoline engines. Topics include basic engine components and their functions, engine performance terminology, two- and four-stroke operation, combustion principles, and engine disassembly with basic hand tools. Co-requisite: DIT 111.
DIT 111 Introduction to Diesel Engines Lab (2)
Practical experience of concepts from DIT 110. Co-requisite: DIT 110.
DIT 112 Diesel Engine Repair (3)
Students learn to take a disassembled engine and evaluate the condition of each component. They identify the use or function of each component of the engine. Topics include cylinder block and components, cylinder heads and valve train components, and engine lubrication systems. Prerequisites: DIT 110, DIT 111 or ADX 150, ADX 151 Co-requisites: DIT 113
DIT 113 Diesel Engine Repair Lab (2)
Practical experience of concepts from DIT 112. Co-requisite: DIT 112.
DIT 120 Introduction to Maintenance Welding (3)
This course provides training in the identification, inspection and maintenance of welding electrodes. Training will be given in the principles and processes of welding plates and pipes. Instruction will be given in lab safety and basic oxy fuel cutting.
DIT 121 Introduction to Maintenance Welding Lab (2)
This course provides laboratory experiences in which students acquire the manipulative skills needed to weld surface, fillet, and groove welds in fl at and horizontal positions. The studies will perform oxy fuel cutting operations.
DIT 122 Undercarriage (3)
Students learn the theory and operation of undercarriage systems and their components. These components include endless track, roller track, roller frames, idlers, roller supports, and mainframes. Co-requisite: DIT 123
DIT 123 Undercarriage Lab (2)
This course provides opportunities to troubleshoot and repair some parts of undercarriage systems and their components. These components include endless track, roller track, roller frames, idlers, roller supports, and mainframes. Co-requisite: DIT 122
DIT 140 Hydraulics (3)
Theory and operation of a complete hydraulic system. Co-requisite: DIT 141.
DIT 141 Hydraulics Lab (2)
Practical application of concepts taught in DIT 140. Co-requisite: DIT 140.
DIT 150 Power Trains (3)
Theory and principles of power train systems, diagnosis and repair of components. Co-requisite: DIT 151.
DIT 151 Power Trains Lab (2)
Practical application of concepts taught in DIT 150. Co-requisite: DIT 150.
DIT 152 Powertrain for Construction Equipment (3)
Students learn the theory and principles of the operation of power transmissions. They learn to diagnose and repair power train units including torque connectors, standard and automatic transmissions.
DIT 153 Powertrain for Construction Equipment Lab (2)
Students troubleshoot, disassemble, evaluate parts and reassemble components of a power train system, such as torque connectors, standard and automatic transmissions, and drive lines.
DIT 160 Steering and Suspension (3)
Theory and operation of steering and suspension systems. Co-requisite: DIT 161.
DIT 161 Steering and Suspension Lab (2)
Practical application of concepts taught in DIT 160. Co-requisite: DIT 160.
DIT 180 Brakes (3)
Theory and operation of air and hydraulic braking. Co-requisite: DIT 181.
DIT 181 Brakes Lab (2)
Practical application of concepts taught in DIT 180. Co-requisite: DIT 180.
DIT 190 Electrical Systems for Diesel Equipment (3)
The theory and operation of wiring circuits and battery service. Prerequisite: DIT 102 with a grade of C or better. Co-requisite: DIT 191.
DIT 191 Electrical Systems for Diesel Equipment Lab (2)
Practical application of concepts taught in DIT 190. Co-requisite: DIT 190.
DIT 193 Special Problems I (1)
A course designed for the student who has demonstrated special needs. Prerequisite: Permission of instructor.
DIT 195 Special Problems II (2)
A course designed for the student who has demonstrated special needs. Prerequisite: Permission of instructor.
DIT 197 Special Problems III (3)
A course designed for the student who has demonstrated special needs. Prerequisite: Permission of instructor.
DIT 198 Practicum (1)
The Practicum provides supervised on-the-job work experience related to the student’s education objectives. Students participating in the Practicum do not receive compensation. Prerequisite: Permission of instructor.
DIT 199 Cooperative Education (1)
The cooperative education program provides supervised on-the-job work experience related to the student’s education objectives. Students participating in the Cooperative Education Program normally receive compensation. Prerequisite: Permission of instructor.
DIT 298 Practicum (2)
The Practicum provides supervised on-the-job work experience related to the students education objectives. Students participating in the Practicum do not receive compensation. Prerequisite: Permission of instructor.
DIT 299 Cooperative Education II (2)
The coop provides supervised on-the-job work experience related to the students education objectives. Students participating in the Cooperative Education Program normally receive compensation. Prerequisite: Permission of instructor.
DLT 101 Dental Morphology (2)
The anatomical characteristics and dental terminology of the permanent human detention are detailed. Other topics include dento-osseous structures, oral musculature, and the development of teeth. Waxing exercises of selected teeth are performed in the laboratory as a means of understanding tooth form and the development of manual dexterity. Prerequisites: Admission into the Dental Laboratory Technology Program or consent of instructor.
DLT 111 Dental Materials I (2)
The major content of this course includes an introduction to the study of dental materials including basic concepts in chemistry. Emphasis is placed on the chemical and physical properties of gypsum, resin, and wax used in dentistry. Basic manipulation of these materials is included in order to prepare the student for future use in the dental laboratory. Prerequisites: Admission into the Dental Laboratory Technology Program or consent of instructor.
DLT 112 Dental Materials II (2)
This course emphasizes the metallurgy of dental alloys including the mechanism of crystallization, strain hardening and the chemical process of corrosion. Materials associated with fabricating dental prostheses are studied and include impression materials, cast alloys and wrought alloys. Hazard and infection control procedures in the dental laboratory are presented as well as basic study of applicable physics and unit conversion. Prerequisites: DLT 111 or consent of instructor.
DLT 121 Complete Dentures I (2)
The basic principles of complete denture prosthodontics is presented including the fundamentals of arranging and contouring artificial dentures. Identification of oral landmarks and changes that occur in the edentulous patient are discussed. Emphasis is placed on identifying the purpose and use of custom trays, baseplates and occlusion rims. Laboratory procedures include fabricating custom trays, baseplates, occlusion rims, and a complete set of dentures. Prerequisite: Admission into the Dental Laboratory Technology program.
DLT 122 Complete Dentures II (2)
Advanced principles of complete denture prosthodonitics are presented including balanced, monoplane and lingualized occlusion. Emphasis is also placed on the considerations in the oral cavity that affect the success of removable prosthodontic treatment. Laboratory procedures include denture repairs, selective grinding and fabricating complete dentures. Prerequisite: DLT 121.
DLT 131 Removable Partial Dentures I (2)
The basic principles of removable partial denture prosthodontics are presented. Emphasis is placed on the fabrication procedures and understanding of the basics of survey and design. Detailed information about the various major and minor connectors is discussed as well as learning the Kennedy Classification system. Laboratory procedures include fabricating two removable partial dentures including the attachment of artificial denture teeth. Prerequisite: Admission into the Dental Laboratory Technology program.
DLT 132 Removable Partial Dentures II (2)
Advanced principles of removable partial denture prosthodontics is presented with emphasis on design principles. Detailed information about direct retainers, indirect retainers, rests and bases is discussed. Laboratory procedures involve fabricating three removable partial dentures including the attachment of artificial denture teeth. Prerequisite: DLT 131.
DLT 142 Occlusion (2)
Theories of occlusion; interarch and intraarch relationships; the temporomandibular joint and its movements; articulators, interocclusal records, and face-bow transfer; occlusal schemes; and restorative considerations in occlusal therapy are discussed and/or put to practical application in this course. Prerequisite: Admission into the Dental Laboratory Technology program.
DLT 151 Fixed Prosthodontics I (2)
The basic principles of crown and bridge fixed prosthodontics are presented including the fabrication of both single and multi-unit full metal restorations. Emphasis is placed on preparing and evaluating working casts, waxing anatomical tooth patterns, spruing, investing, burnout, casting, and polishing. Additional laboratory procedures include fabricating restorations on various types of articulators, developing functional occlusion, and soldering. Prerequisite: Admission into the Dental Laboratory Technology program.
DLT 152 Fixed Prosthodontics II (2)
The basic principles of metal ceramic fixed prosthodontics are presented including the fabrication of both single and multi-unit restorations. Emphasis is placed on esthetic restorations, preparing and evaluating working casts, waxing substructure patterns, spruing, investing, burnout, casting, and polishing. Additional laboratory procedures include applying opaque, dentin, and enamel ceramic powders and contouring fired porcelain. Prerequisite: DLT 151.
DLT 261 Applied Laboratory Techniques (8)
Students fabricate a more complex variety of dental prostheses in four specialty areas: complete denture prosthodontics, removable partial denture prosthodontics, dental ceramics, and fixed prosthodontics (crown and bridge). Curriculum content includes reinforcement of techniques and procedures that are taught in the 100 level Dental Laboratory Technology courses. Emphasis will be placed on management of laboratory time and project load to improve the quantity and quality of laboratory work. Prerequisites: DLT 122, DLT 132, DLT 142, and DLT 152.
DLT 262 Advanced Specialty Laboratory Techniques (8)
Students fabricate dental prostheses at a more advanced level in at least one of the following specialty areas: complete denture prosthodontics, dental ceramics, fixed prosthodontics (crown and bridge), orthodontic appliances, or removable partial denture prosthodontics. Emphasis is placed on incorporating productivity, flow time, and quality requirements. Laboratory experience is provided in the classroom or selected externships in local dental laboratories. Prerequisite: DLT 261.
DLT 281 Orthodontic Laboratory Techniques (2)
Fixed, removable, active and passive orthodontic appliances are studied in this course. Principles of tooth movement, classifications of malocclusion, orthodontic materials and their manipulation, orthodontic study models, and functional appliances will be discussed. Prerequisite: DLT 122.
DLT 291 Dental Laboratory Management, History and Ethics (2)
Dental laboratory management, business plans, financial planning, history of dentistry and dental technology, and those ethics and laws which are specific to dentistry will be presented. Prerequisite: Completion of all 100 level Dental Laboratory Technology courses.
DRE 010 Reading Laboratory (3)
Designed to improve reading comprehension and vocabulary skills, to develop a variety of reading rates, and to prepare students for college reading through individualized and/or group instruction and practice. Students will be recommended to this course based on the placement examination.
